Poly Membrane 9001 Waterproofing

Suitable Surface: Concrete & brick masonry, Cement mortar beds, Cement plaster, Gypsum wallboard, Exterior grade plywood, Ceramic tile & stone , Cement terrazzo, Cement backer board.

Note : Membrane reinforcing fabric for coves, corners and board joints is sold separately. fabric roll packing : width-15 cm and length -18 m to 25 m.

Features :

• It protects gypsum board, cementitious board and concrete against water penetration under long-term weathering.
• Highly durable and economical.
• Easily brush applied.
• Membrane upto 3mm bonds directly to copper steel and PVC plumbing fixtures.
• Fast drying, flood test can allowed after 24 hours.
• It can be used for both, internal and external application.

Application Method :

• Saturate and neatly clean the surface to remove dirt, dust, loosely attached particles and bond inhibiting compounds.
  It is a ready to use product.
  Just stir and apply
• After applying allow itto stand for 5 minutes before itto mature.
• Brush the product firmly on to the primed surface. Care must be taken not to spread the material too thin on the surface
• Allow atleast 2-4 hours to cure before applying subsequent coats.