Tile Adhesive

Advantage: Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall.

Suitable Surface: Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo.

Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm

Key Features

• It is ready to mix; a single component product, just add water in the specified proportion and apply.
• It has excellent adhesion properties, no slip is observed on vertical applications.
• Shrinkage cracks are minimized /eliminated due to its self curing properties.
• Large quantity of mate...

Advantage: Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall.

Suitable Surface: Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo.

Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm

Key Features

• It is ready to mix; a single component product, just add water in the specified proportion and apply.
• It has excellent adhesion properties, no slip is observed on vertical applications.
• Shrinkage cracks are minimized /eliminated due to its self curing properties.
• Large quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for the foot traffic after 24hours.
• It is recommended for window and doors frames.

Surface Preparation :

• Clean the substrate of oils stains and bond inhibiting compounds, also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks.
• Correct the local undulations/damage on the substrate at least 48 hours before the application of HOMEPRIDE 1021 MULTIPURPOSE ADHESIVE.
• Saturate the surface well and remove excess water before application of the tile adhesive.

Details :

• Advantage: It can be used on various surface drive wall directly, under water application single component with ultimate bond strength. Single pack just mix with water.
• Applications: Both for interior and exterior facades and under water application.
• Suitable Surface: Concrete, cement plaster, cement tiles and stones Brick Masonry, exterior grade plywood, gypsum wall board. Ceramic tile and stone, gypsum wall board.
• Coverage: Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Surface Preparation :

• Clean the substrate of oils stains and bond inhibiting compounds, also remove dirt, dust and laitance, if a...

Details :

• Advantage: It can be used on various surface drive wall directly, under water application single component with ultimate bond strength. Single pack just mix with water.
• Applications: Both for interior and exterior facades and under water application.
• Suitable Surface: Concrete, cement plaster, cement tiles and stones Brick Masonry, exterior grade plywood, gypsum wall board. Ceramic tile and stone, gypsum wall board.
• Coverage: Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Surface Preparation :

• Clean the substrate of oils stains and bond inhibiting compounds, also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks.
• Correct the local undulations/damage on the substrate at least 48 hours before the application of HOME PRIDE 1031 SUPER PLATINIUM/STONE ADHESIVE.
• Saturate the surface well and remove excess water before application of the tile adhesive.

Key Features :

• It is ready to mix; a single component product, just add water in the specified proportion and apply,
• It has excellent adhesion properties, no slip is observed on vertical application
• Shrinkage cracks are minimized/eliminated due to its self-curing properties.
• Large quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for the foot traffic after 24 hours.
• It is suitable for heavy duty applications with moderate structural movement.
• It is recommended for external cladding.

Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Suitable Surface: Cement Plaster, Brick Masonry, Ceramic Tiles and Stone (Mix with 93 Mortar Admixer) Concrete, Cement Mortar bed.

Coverage: Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Suitable Surface: Concrete, concrete masonry, cement mortar bed, cement plaster, ceramic tiles and stones brick, masonry

Coverage: Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.