Home Pride



Advantage:

  • Ready to use, Just add water.
  • Provides Excellent Adhesion between two blocks.
  • Reduces the time required for mounting the blocks.
  • No curing required after blocks work is done.
  • Flexible, shocks and impact resistant.

 

Area Applications: It is recommended for fixing all type of Auto clave aerated concrete (AAC) Block.

  • Concrete blocks
  • Cement mortar blocks
  • Concrete hollow blocks and bricks
  • Cellular concrete blocks

 

Coverage : Approximately 100sq. ft per 50kg bag when used at 2-3 mm bed thickness. Coverage is based on smoothness and evenness of the surface , size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder.

 

Key Features:

  • Ready to use just add water.
  • Provides Excellent Adhesion between two blocks.
  • Reduces the time required for mounting the blocks.
  • No curing required after blocks works is done.
  • Flexible shocks and impact resistant.
  • High strength.
  • Improved bond strength, compressive & tensile strength.
  • Thin jointing with high adhesion to contribute to load bearing capacity of masonry.
  • Long working time.Fast & economical.

 

Suitable Substrates:

  • Concrete Blocks.
  • Cement Mortar Blocks/Bricks.
  • Concrete hollow blocks.
  • Aerated Light weight blocks.
  • Cellular concrete blocks.
  • Fly Ash Bricks.

 

Area of Application : It is recommended for fixing all type of auto clave aerated

  • concrete (AAC) Block.
  • Concrete blocks.
  • Cement mortar blocks.
  • Concrete hollow blocks and bricks.
  • Cellular concrete blocks.

 

Coverage :

  • Approximately, 100sq. ft. per 50kg bag when used 2-3mm bed thickness. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder.
  • The following is the coverage table for wall area in square feet that can be constructed using HP AAC BLOCKS of size 600mm X 200mm X 100MM.

 

Cautions:

  • During cold weather, protect finished work from use until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin.
  • Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
  • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid
  • breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children.

Specifications

Colour Grey
Packaging 30 kg & 50 kg
Thickness 2 mm-- 6 mm
Certificate ISI: Type 2 AdhesiveMeet ANSI: A118.1.
Coverage for 50kg bag 300Sft - 100Sft
Coverage for 20kg bag 120Sft - 40Sft
Wet Density 1750kg/m3
Pot Life 60 minutes
Open Time 25 - 30 minutes
Tensile Adhesion Initial> 0.5Mpa,
Strength @14 Days After Immersion>1.2 Mpa
Time to Plaster 24 Hours
Time to Full Dry Hard 14 Days
Flexural Strength 3Mpa



Looking for Product Name ?