Polymer Modified Adhesive

Home Pride 999 is a wonderful mixture of cement, polymer and natural mineral and other aggregate to produce adhesive when mix with water. For installation of small and medium tile on floor for interior only. It is a fantastic product in single packing with unique features and advantages. It is easy to apply and can be carried out by an ordinary labour.

Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Home Pride 1001 polymer modified adhesive for installation of small to medium format ceramic,vitrified wall and floor tiles in interior areas for improve performance and for exterior use fortified with home pride 93 create admix.

Suitable surface: Cement Plaster, Brick Masonry, Ceramic Tiles and Stone (Mix with 93 Mortar Admixer) Concrete, Cement Mortar bed.

Coverage: Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Home Pride 1021 is premium floor and wall thin-set adhesive to be mixed with water or latex for installation of medium and large format tile vitrified tiles, marble and stone on exterior floors and walls. When mixed with 93 create admix for improve performance or with home pride 3333 flexible admix for use in plywood applications.

Advantage: Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall.

Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Suitable Surface: Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo.

A wonderful mixture of cement, silica and different polymers for installation of ceramic, vitrified tiles, stones, Quarry tiles, pavers and bricks on facades. It is flexible to handle structural movement and can take on extreme weather conditions. When mixed with water it has long open time with unsurpassed adhesion and workability. 

Advantage: It can be used on various surface drive wall directly, underwater application single component with ultimate bond strength. Single pack just mix with water.

Suitable surfaces: Concrete, cement plaster, cement tiles and stones Brick Masonry.Ceramic tile and stone.

Coverage: Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Home Pride Tile Bonder is Single Component when mixed with Cement it gives ultimate Strength for fixing tile on wall & floor recommended for interior & exterior use.

Home Pride AAC block Jointing Adhesive is a ready-to-mix prepared blend of carefully raw material portland cement and graded aggregates and polymers. Designed for use with water to produce high-strength mortar. Which help & in providing mechanical bond as well as excellent adhesion between the blocks.

Advantages

• Ready to use, Just add water
• Provides Excellent Adhesion between two blocks
• Reduces the time required for mounting the blocks
• No curing is required after blocks work is done
• Flexible, shocks and impact resistant

Applications

• It is recommended for fixing all type of Autoclave aerated concrete (AAC) Block
• Concrete blocks
• Cement mortar blocks
• Concrete hollow blocks and bricks
• Cellular concrete blocks

Coverage: Approximately 100sq. ft per 50kg bag when used at 2-3 mm bed thickness. Coverage is based on the smoothness and evenness of the surface, size of blocks used and the thickness of mortar used. A general guideline for coverage of mortar is given when used with 25% water added to powder.

It is two-component when mixed together give high strength adhesive for installation of ceramic, vitrified, metal glass and agglomerates glass tiles and natural stone on any substrate.It is highly elastic, thixotropic and suitable to lay water-sensitive tile & stones on highly expandable deformable, and non-absorbent substrates.

Advantage: Suitable for all the substrates including metal, highly flexible & superior strength good for the vertical surface.

Applications: For interior & exterior wall and floor installation of all type of tile whether ceramics, vitreous or other type of tile & metal tile and natural stone over metal substrates, concrete and dry wallboards.

Coverage: 15 to 17 sq.ft. per pack of 8kg with ¼”X ¼”(6mm X 6mm) square notch trowel for bed of 3mm lot of depends on the variation of trowel notch size type of tile and substrates smoothness and evenness.

Suitable Surface: Cement plaster without loose particles, concrete on all type of tile and stone, wood, plywood gypsum board, cement terrazzo engineered stone & marble.Epoxy, resin and metal surface.

It is a polymer-modified liquid ready-made adhesive.No need to add anything designed for the installation of tiles on most drywall boards and cement base surface free from dust and loose particles.Tiles such as Glass Mosaic Ceramic tile and natural stone can be easily fixed with Polycryl 1051.It is single component adhesive which is ready to use.

Advantages

• Ready to use/single component,high strength,save time.
• Can be used on various dry wallboard.

Applications: For commercial and residential installation of tile.Used where installation must resist shock and mild chemical for interior and exterior uses.

Suitable Surface: Cement mortar bed, plywood, gypsum wallboard, calcium silicate board, concrete bison panel board, concrete surface, cement plaster, AAC block cement backer board existing ceramic tile other resilient tile and stone.

Precautions

All cement base surface should have been cured as per standard practice and shall be dry for tilling.
Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
Not for use on metal & plastic substrates.